Flash Car Door Warning Strip

Who is at fault when an open car door is hit?  In general, if you ran the car when the other car door was open, its your fault. If the other car door just opened while your car was approaching, then it can be a 50/50 fault or the other car's fault. Doesn't matter if the other car door was open wide or slightly open - it is the moving vehicles fault.

Opening the car door into traffic is the same thing as pulling out into traffic. It is “failure to yield right of way” to the vehicle on the street.

However—timing is important. If the car door was opened before the car on the street was in proximity, that driver has a duty of lookout and avoid striking it.

Make your car safer！

This Flash Car Door Warning Strip is the latest safety measure for your vehicle. When the door is opened, the red light flashes to avoid accidental collision.  Improves the visibility of passers-by. Also the bottom of the car light is white light and is  projected on the ground so that you can see the ground clearly when you get out of the car, avoiding stepping on water or garbage.

We took into account the need to open the doors on rainy days, when visibility becomes lower. We designed this door lightbecause of it's waterproof function and weather penetration effect with low visibility.

UNIVERSAL DESIGN: Fit for any car, SUV, truck. does not destroy the original car lines, just paste it in the door and connect the positive and negative power supply to power on 3 MODES FLASHING----- White/red running +breathing mode + stobe（red）/ always bright （white}. 

HOW THE WARNING WORK: When the door opens, the RED light flashes, and the White light stays bright，warning the rear pedestrian or vehicle, to avoid accident or collision.   

WATERPROOF DESIGN: Soaked in water for 30 minutes, it still  works. High-tech component sensing: through the IR chip program control, it increases the sensitivity, to maintain the stability of the product. 

 EASY INSTALLTION 1. Tear the adhesive around the edge of the door to fix it 2. Pry open the gap at the bottom of the door 3. Put in the drive to hide, pull the wire to the door light 4. The red line is connected to the anode of the door Black wire to negative

Specifications : For Vehicle Brands/Models: Universal

Led Light Color: Red light and white light
Material: ABS+Silicon
LED Type: 2835 SMD
Length:47 Inches
Number of lamp beads: 144 pcs
Wattage: 28.8w
Input Voltage: 12V

Lumens: 2400Lm
Item Weight: 0.2kg
Material: ABS+Silicon
Light Length: 120cm
Waterproof Rate: IP68